Now Hiring Techs & Installers | Best Pay & Benefits in D/FW
How Air Conditioner Can Be Used to Control Indoor Humidity Efficiently? 6/17/2022

Summer has commenced, and residents have begun leveraging their air conditioning systems. However, it is not only the heat that people are struggling with this season. Humidity is also another challenge that natives must overcome to stay comfortable.

Not many of us are aware of the fact that we can also use the air conditioning systems to lower the room’s humidity. Therefore, we have mentioned some techniques by which users can control their AC system to reduce humidity. You will find these tips helpful if you plan to arrange AC installation shortly.

  • Adjusting Fan Speed –

    When you set your AC fan high, cooler air comes inside your room fast. However, this action is not efficient in removing moisture. If you adjust the fan speed to low, the lower airflow rate will result in cooler coils, which in turn are more effective in removing humidity.

  • Cleaning Filters Regularly –

    AC filters should be clean to cool the room efficiently. Blocked filters increase one’s exposure to dirt, dust, etc. In addition, dirty filters can also lead to the deposition of moisture in ducts. Therefore, you must clean the filters whenever the system indicates. Also, if the technician advises a filter change during AC service, you should replace it.

  • Keeping Fan at Auto Setting –

    The Auto mode in our ACs shuts the system off between consecutive cooling cycles. It results in proper drainage of the condensation of coils instead of adding moisture indoors.

  • Installing Thermal Expansion Valve –

    Also known as the TXV, the valve regulates the coil surface area depending on the quantity of refrigerant required to circulate. Thus, it makes the AC’s evaporator coil function effectively.

  • Cleaning Coils –

    Dirty coils can be a consequence of uncleaned filters. The AC’s blower fan pulls particulates towards itself, resulting in lesser cooling and more moisture. Hence, one should clean the coils when required after going through the instruction manual.

  • Installing Dehumidifier –

    The entire onus of removing indoor moisture on the AC can strain its system. Therefore, a wiser decision would be to install a humidifier for the full house. You can choose to install the whole-house humidifier hand in hand with AC installation McKinney.

  • Keeping Refrigerant Fully Charged –

    Low refrigerant charge puts extra pressure on the AC to remove moisture and heat from the room. The worst scenario, in this case, can be freezing of coils or a malfunctioning compressor, which may call for extensive repair or replacement. Therefore, to avoid these mishaps, you should check the refrigerant charge regularly and keep it full.

The Closing Thoughts

Staying inside humid rooms is not a pleasant experience. Hence, you can try the easy methods mentioned above to reduce the moisture content in your home. If we know how to use our air conditioning systems effectively, we can use this device to its maximum potential. Furthermore, you should also arrange for AC service at McKinney if you find the slightest abnormalities in the system. Timely proactivity can help avoid the aggravation of underlying problems. Start market research if you are looking for the best AC repair services in your city. It will help you to identify the best service providers in the industry. You can interview them before you finally avail their services. Always bank on the reputed service provider of the industry.