Winters are just around the corner, and we all are prepping our homes for the chill. Apart from unloading the garments and insulating the water pipes, an essential prerequisite for the cold is arranging Heating Maintenance Plano. We must get our central heating systems in our homes serviced before the winter begins as we would use them the most in the coming months.
Maintaining a heating system helps detect any underlying issues and enables the repairing done well in advance, instead of at the eleventh hour. Thus, maintenance sessions of the heating systems bi-annually, each before summer and winter, are necessary every year for the proper functioning of our central heating systems. The system maintenance also optimizes its efficiency in the months we want them to perform the best.
Below we have provided some key checking points regarding Heating Maintenance Plano. We can perform a few of these works if we have the basic knowledge of how these systems operate, while for most tasks, a trained professional is required.
- Checking the thermostat:
A thermostat is a device that controls the temperature in any system automatically. To check if it is functional in our heating systems, you can switch it on to see the outcomes. If the furnace is audibly activated and continues to operate, the thermostat is effective.
On the other hand, if the furnace gets deactivated shortly after three minutes of run-time, it implies short-cycling, which can be due to a faulty thermostat. In the second case, we must contact the technician for Heating Maintenance Plano, who will either change the thermostat or modify its calibration.
- Maintenance in forced-air central heating systems:
This category of heating systems works by transferring the heat generated by furnaces through pipes or ducts. The foremost work we can do to maintain this type is to check its filter every month. Residents of places that have more air pollution must change at least three filters monthly.
When the technician visits for Heating Maintenance Plano, he would clean the ducts and repair or replace the rusted ducts. He will check the chamber where furnace combustion occurs and clean the deposited dust after cutting the electricity supply. He will also clean the blower and the site where it is installed.
- Maintenance in hydronic central heating systems:
This type of heating system operates by transferring the heat through radiators created by the boilers. The users can ensure water accumulation in the valves by turning the thermostat on and checking the boiler room after sufficient pressure is built up. If there is any leakage in the valves, call a technician. The professional will switch the water and electric supply off and flush out the entire system before repairing or refitting the valves.
During Heating Maintenance Plano, the technician will check the pressure and temperature of the water, which must be within 12 PSI to 25 PSI, and 180 to 200 degrees Fahrenheit, respectively. He will also lubricate the circulation pump and clean the combustion chamber of the boiler.
We hope to give you a sneak-peak about the essential maintenance checklist for the central heating system. Follow the checklist, and we are sure it will help your central heating system serve you better. Seek the assistance of a professional HVAC maintenance specialist today.