Several times, your air conditioner may face problems which may not need the expertise of an HVAC pro. So, next time when your air conditioner doesn’t function properly, try these common air conditioner troubleshooting tips before giving them a service call. There may be small quirks that can be fixed easily and quickly enough. Try them!
Humidity Persists Even When AC Unit Is Switched On
In a scenario when your air conditioning unit stops giving off cooler air, check its coils, filter and register and duct sizing. Anything can occur in any or all three. So, before calling in the professional, just check the following –
- Coils: Every room air conditioner has an outdoor condenser coil and an indoor evaporator coil. These coils extract heat from your home and push it outside and keep the house cool at all times. The evaporator coil should be devoid of any dirt, dust and grime because even a little dirt can inhibit cooling. Use a garden hose and spray through the outdoor cabinet. Repeat the cleaning activity once or twice a month.
- Filter: It is mandatory that you clean the air filters each season because a clogged air filter hampers blower operation, increases energy bills and contribute to poor cooling.
- Is Your Air Conditioner of Optimal Size? It is normally seen that for optimal cooling, you need an air conditioning unit of right dimensions. Oversized or undersized units hamper cooling. Accidentally, if you have purchased a wrong-sized unit, you can mitigate the problem using a variable speed blower rather than considering unit replacement.
Thermostat Woos
Sometimes, we overlook the thermostat which plays a crucial role in cooling the home. So, as your air conditioner stops working at its full efficiency, the first thing to check is the thermostat.
With a steel welded deck, it can be used in environments Riding Lawn Mower Under 2000 which could cause damage to other mowers that are not built for the same purpose.- Check Power & Settings: Before looking in the inside of an AC unit, make sure that the thermostat is switched on and is in “Cool” mode. If the thermostat is off, check the circuit panel for a tripped breaker.
- Heat Anticipator: If your AC works on a manual thermostat, remove its cover and check the heat anticipator. The pointed metal switch needs to be moved a notch or two until cooling begins closer to the set point.
After all these checks, if you are still unable to find the air conditioner problem, it is ideal to call HVAC pro.